EVERY PAID ORDER now gets a $5.00 coupon code toward a future order!
(details inside shipment)
Mountain
Subdivision Hobbies
modelrrsupply
ESU LokSound
We are an Authorized ESU LokSound Dealer
– Check our feedback, we are an experienced
long time eBay seller.
#58823 Loksound 5 DCC MICRO Sound Decoder
Bare single wires – NEW!
Programming info:
ESU Loksound decoders require a sound file to be loaded, they are shipped with factory test file only.
Need a sound file loaded? Contact us for details
Want to buy your own Lokprogrammer? Search item 53452 in our store.
See photos for more information on these decoders and sound file choices. Some photos show other ESU decoders, this listing is for the Loksound 5 DCC #58820.
Speakers are not included with the Loksound 5 DCC decoders
– we have a great selection in our eBay store from multiple manufacturers.
The
LokSound 5 micro
is actually a “small miracle“: With a footprint of 21mm x 10 mm it is by far the smallest LokSound decoder, which we have ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All LokSound decoders are equipped with a Next18 interface and are available with adapter plugs to suit all popular digital interface types. The decoder is supplied with an 11mm x 15mm sugar cube speaker as well as a sound enclosure set.
Operating modes
The LokSound 5 micro is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.
This decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.
Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Control Unit 6021.
The M4 protocol supports the automatic registration on mfx® compatible central units.
The LokSound  decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.
The LokSound 5 micro decoder is also suitable for analogue DC and AC (!) layouts.
Sound
The LokSound 5 micro decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A double class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.
The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.
The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.
Functions
Despite its small dimensions the LokSound 5 micro decoder has at least 6 amplified function outputs as well as one logic output. There are two more logic outputs on the Next18 interface, which alternately may be employed to control RC servos. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz – required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers.
Motor control
Motor control of the LokSound 5 micro has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 micro decoder supplies sufficient motor current (up to 0.75 A) for the intended applications.
LokSound 5 micro DCC
The LokSound 5 Micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.
__________________________________________________________________
Questions, Special orders, Inventory requests:
Please contact us using eBay’s message system.
Your shipping address
:
IMPORTANT!!
Please confirm your shipping address is correct
before
making payment.
You know where you live, we don’t!
eBay does not allow us to change an address after payment is made.
If you ask us to change address, it will require us to cancel your order, ask you to correct your address and redo order.
Combined Shipping: International
Due to eBay’s new policies, they require us to require immediate payment on your purchase.
PLEASE use the eBay shopping cart – it may save you money!
In the event eBay overcharges you for shipping, we will send a refund for the correction.
Combined Shipping Discounts: USA
Due to eBay’s new policies, they require us to require immediate payment on your purchase.
PLEASE use the eBay shopping cart – it may save you money!
If we issue a credit for overpayment of shipping, we may deduct a portion of the overpayment to cover eBay fees.
eBay DOES NOT refund the fees we pay based on shipping charges if we issue a refund for shipping!
Paid orders may be combined or ship as seperate orders with no shipping refund.
USA Shipping:
We ship using USPS First Class, Parcel Post, Priority Mail, and occasionally FedEX.
We may
upgrade
your shipping method at our discretion.
Tracking is provided. Orders over $750 will require a signature per Paypal rules.
International Shipping, Customs Fees, Import Taxes and Duty:
We ship USPS First Class International and Priority Mail. It’s your choice!
There is limited or no tracking on FCI or Flat Rate Priority Shipping.
Allow two to ten weeks when choosing First Class International, but it’s usually far less.
Please Note:  Import duties, taxes, and charges are not included in the item price or shipping cost.
These charges are the buyer’s responsibility.
Please check with your country’s customs office to determine what these
additional costs will be prior to bidding or buying.
Don’t ask us to falsify a customs form…We will not do it.
Insurance:
We insure all International shipments and some domestic shipments.
Our insurance carrier requires a 20 day domestic (USA) and 40 day International waiting period before we file a claim.
You agree to wait the required time and agree to complete a online affidavit for the insurance company if we file a claim for your lost or damaged shipment. Shipsaver is our carrier and they provide excellent
service.
Handling and Shipping time:
WE SHIP FAST!
All orders ship same or the next day. In the event of an issue, we will message you via eBay message system.
Read our feedback page to see what our customers say about us.
Please be aware USA Shipping Holidays may affect International Shipments.
Sales Tax:
New York Residents will be charged Sales Tax – It’s the law.
Returns:
No returns are accepted on opened items.
All items we sell are covered by Manufacturer Warranty.
D
o not open a return case for defective items, Contact us FIRST, we’ll work it out.
A restocking charge of 15-20% may apply.
We do not refund original shipping charges.
Please review the return policy on the shipping tab.
Warranty?    New or Used?:
Everything we sell is brand new and covered by Manufacturer’s Warranty unless noted.
We will assist you in the warranty process if needed.
We only sell brand new items –
Our items are all factory fresh!
Thanks for choosing Mountain Subdivision Hobbies
Supplying modelers with items from premium model railroad & DCC manufacturers since 2002